ET-A100 thermal pad

thermal pad

Brief introduction
ET-A100 is thermal pad 0.2mm .The thermal Silicone Pad is using silicone as basic material, adding fiber glass, synthesized by a special process.This thermally conductive pad is dedicated to the design of the gap heat transfer production, to fill the gap, heat transfer between the heating part and the radiating part. but also played insulation, damping and sealing effect, can meet the design requirements of equipment miniaturization and ultra-thin, futhermore wide range of thickness, excellent thermal conductivity of a filling material.

.MATERIALS BENEFITS

• Very high thermal performance with reduced interfacial thermal resistance
• Noise/vibration dampening
• Shock absorbing, excellent thermal shock resistance and very high operating temperatures.
• Both sides compressible
• No interference or delamination
• Easy handling with no elongation
• Flame retardant
Other
Die-cut as drawing,optional both side with backing glue,optional thickness 0.2mm to 15mm,other colors

Thermal pad 0.2mm

Unit

Data

Test  Method

Material

-----

Silicone/fiber glass

 Visual

Thickness

mm

0.2mm

ASTM D374

Standard size

mm

200×400

ASTM D1204

Hardness

Shore A

40-55

ASTM D2240

Breakdown Voltage

Kv/mm

≥6.0

ASTM D149

Use Temp

 -40~220

EN344

Flame Rating

------

94V-0

UL 94

Thermal Conductivity

W/m.k

1.5

ASTM E 1461-01

If you need other thickness,please see below link

Thermal pad Thickness catologue